![](../chinese/product/products/s8_7l.jpg)
S8
is the latest high capability integrated amplifier,
building on the sustained success of models like the
R30. Based on
decades of experiences on research, development and
handcraft for audio amplifiers by Dussun, every new
design in S8 aimed at the clear objective for sound
quality and tone improvement.In order for its output
music signal by S8 possessing high fidelity against
the music source, output characters matching electrodynamic loudspeakers’ electric-sound
characters, The design of S8 went through a long
time repeated audition, measure and improvement
process,which
made the finished S8 achieve the ideal matching
level for signal magnification circuit, volume
control circuit, power supply system and interior
construction. In addition to the technical
specification for a hi-end amplifier deserved,S8’s
sound possessed outstanding quietness, rich details,
dense timbre and transparent and spacious tone. It
escorted the audience to rediscover the performing
atmosphere and rich sound spacial information from
those familiar CDs which missed before.
●left
and right channel fine synchronized high precise
volume control
Considering the volume control device is one of the
souls of an amplifier, S8 employed Dussun developed
volume control device, which set up by a 16-bit
digital controlled analogue circuit and possessed
1/65,535 level super fine resolution within whole
volume control range. This volume control
comprising circuit high linear solid state
switch and precise resistance, ensured precise
synchronization of S8’s
left and right channel volume control at any
position within its 80 dB volume control range. All
problems of sound quality degradation and
application intervention from frequency and phase
distortion, volume synchronization error, sliding
friction noise, limited lifetime attribute to
traditional volume control potentiometers’
various voltage ratio, was eliminated by S8 volume
control. Either working principle or practical
performance, S8 reached the highest technical level
fully among the state of the art hi-end amplifier
volume control and pride.
●Low
distortion, Non-feedback at poweroutput
terminal,Poweroutput
stage:
The newest designed
“Optimized
Self-Adaptive Bias Circuit”
Improved significantly linear in output stage signal
crossover region, while maintaining large power
output without switch distortion. Much different
from routine design which removed output stage
feedback resulting in non-linear distortion large
increase, especially at high frequency side, S8
accomplished super low crossover distortion by its
“Optimized
Self-Adaptive Bias Circuit”.
Along with the most nature and spacious tone from a
“non-feedback at output
terminal amplifier”,
S8 achieved the perfect result of full power
output, low distortion, high sound quality in whole
audio frequency.
●Thorough
independent dual-mono channel design:
![](../chinese/product/products/s8_8l.jpg)
S8
left and right channel circuit as well control
units were equipped with individual independent
power supply system. Data used to control individual
channel was transmitted in term of optical. Absolute
electric isolation made S8 is true to its name,
dual mono channel amplifier, which working as same
as two sets of precisely synchronized independent
mono channel amplifiers, nil stereo crossover
between left and right channel, resulting in
pinpoint accurate sound images.
●Strong
control and pre-set function:
Individually pre-set gain level for all input
terminals
Individually pre-set channel name for all input
terminals
Display screen brightness adjustable for 4 levels
Maximum volume pre-set to protect expensive
loudspeakers
Fade-in volume when switching on
Aluminium full function remote control unit
About
“Hyper Class A”
The “Hyper Class
A” is a “Green” Class A solution, whose technically
successful adaptive-bias circuit achieves the extra
large class A power output objective under
conditions of low-power consumption and low heat
producing. The adaptive-bias circuit with an ideal
specification permits the amplifier to maintain
class A mode output even if the speakers’ impedance
drops largely and output power increases several
times. This situation is different from the
traditional pure class A amplifiers’ inevitable
situation of returning to class B when the speaker
load impedance goes down, and is much close to the
ideal class A amplifier essence.
Specifications:
Rated Output: |
2×180W(8Ω) Class A,
2×350W(4Ω) Class A, |
Frequency Response: |
20Hz~20KHz ±0.5dB |
Volume control range: |
80.0 dB |
Gain resolution: |
0.1 dB steps above
31 in display (-50.0 dB) |
Gain: |
6, 12, or 18 dB in the line stage
26.8 dB in the amplifier section |
Input Impedance: |
50KΩ |
THD+Noise: |
≤0.3% |
Signal to Noise Ratio: |
≥103dB(A-weighted) |
Overall
Dimensions: |
435(W)×218(H)×520(D)
mm
17.12(W)×8.58(H)×20.47(D)
in |
Shipping
Weight: |
37 kg
81 lbs |
|